InterfaceIf you already own the Circle Jig
REQUIREMENTS: Please see the Overview.
Our UHMW Interface Slide combines with our Universal Router Plate Kit to become the Micro Fence® Interface. We offer Interfaces for the Festo Tool Guide as well as the following clamps: All-In-One, Eureka, Tru-Grip, and True Trac.
The UHMW Interface Slide mounts on the underside of the Circle Jig trammel bar, (the one with the Micro Fence® micrometer), and fits the extrusion of the clamps. Any router can be mounted on the Universal Router Plate. You can drill the plate yourself by using the factory sub-base from your router as a template (instructions and a centering hub are included with each Interface), or we can pre-drill the plate for you. Just add our Pre-Drill Service to your cart and choose your model router.
This set-up allows micrometer-adjusted cuts, (dadoes, rabbets, flutes, etc.), using the clamp as a straight-edge. Adjustments to the dimension of your cut can be made without moving the clamp. The use of the Stabilizer Bar is highly recommended with this set-up to insure maximum accuracy and rigidity.
All Interface packages and Sub-Base assemblies require a Model "A" Mounting Bar, so if you don't already have one please select the option below that includes the Model A Bar (not sure if you already have the Model A Bar? Call us at 1-800-480-6427 and we can check your customer card).
To get a better idea how our Interfaces work, click here to see our video page.