REQUIREMENTS: Circle Jig (Attachment or Complete) & Model A Mounting Bar.

Our All-In-One UHMW Slide combines with our Universal Router Plate Pkg. to become the All-In-One Clamp Interface. The UHMW slide mounts on the underside of the Circle Jig trammel bar, (the one with the Micro Fence micrometer), and fits the extrusion of the All-In-One clamps. Any router can be mounted on the Universal Router Plate. You can drill the plate yourself by using the factory sub-base from your router as a template (instructions and a centering hub are included with each Clamp Interface Pkg), or we can pre-drill the plate for you for $25.

This set-up allows micrometer-adjusted cuts, (dadoes, rabbets, flutes, etc.), using the All-In-One clamp as a straight-edge. Adjustments to the dimension of your cut can be made without moving the clamp.

To get a better idea how our Clamp Interfaces work, click here to see our video page.

The use of the Stabilizer Bar is highly recommended with this set-up to insure maximum accuracy and rigidity.