Designed specifically for use with table saw cross slides, the Micro Stop has potential to improve set-up control on the chop box, band saw, shaper and router table fences, sanding machines, doweling and mortising machines or anywhere you want to add micrometer adjustment.
We'd like very much for you to send us photos of your new Micro Stop in the application you've found for it. Simply email your digital photos to firstname.lastname@example.org and we will post them below!
* * *
Matt Furjanic sent us this photo of his Micro Stop installed on his table saw sled to dial in the precise dimension of inlay pieces cut from a pre-laminated assembly. These wafers (or chips), will be cut again and used to create repetitive designs for inlay banding. Matt wrote, "A simple solution to a problem requiring an exact measurement. A great time-saver and the accuracy is perfect! Thanks for inventing this."
These photos were sent to us by our customer Glen Blanchard who has installed it on his crosscut sled to micro-adjust length of cut. He fabricated a hinged mechanism to turn the adjustable Micro Stop into a flip stop.
SLIDING DOVETAILS WITH MFK700 These photos were taken by Chris Rosenberger. To read Chris's post on Festool Owners Group, click here. Thank you to Chris and F.O.G. Attaching the Micro Stop directly onto his MFK 700, Chris is able to control the clearances for his sliding dovetails in thousanths.
ROUTER TABLE WITH CIRCLE CUTTING JIG
These photo's were taken by our customer Rae Sewell, with his router table circle cutting jig. The Micro Stop allows Rae to make fine adjustments to the diameter of small circular pieces both to control dimension and to make "whisper" clean-up cuts.
Micro Stop for Correction or Duplicating Part
These photo's were taken by our customer John Piwaron. He installed the Micro Stop to a table to use it for those times he needs a small adjustment either for correcting a fit or making a duplicate part.
Micro Stop for fine adjusting his fence on his Grizzly Sliding Table Saw
I Love this setup,, It works great and is VERY accurate. Thanks Rich!!!
The saw table is a Grizzly G0623X 10 inch slider. I can dial this in with my calipers and follow the dial and BAM!!! Right on target. Thanks again for such a wonderful product that really works.
Micro Fence Customer Duke Graham from Pemberton, NJ.