Riser Block Assembly – Click for more options


The Riser Block Assembly is for use with our Clamp Interface Packages and our Ellipse Packages to properly align the vertical height of our jigs. Three different Riser Blocks, all 1/2″ wide by 3″ long, are available in three different height dimensions (1/4″, 1/2″ and 7/8″).

The 1/4″ block is used with our Ellipse Jigs; the 1/2″ is used with all of our Clamp Interface Packages with the exception of the Eurekazone (this requires the 7/8″ block). You can select the appropriate dimension block from the drop-down box below. The Riser Blocks are packaged with a pair of the Trimmer Posts and appropriate screws, which make it the Riser Block Assembly.


Additional information

Weight .125 lbs
Dimensions 5 × 2.5 × .5 in
Riser Block Size:

1/2" – Clamp Interface, 1/2" – Ellipse Jig, 1/4" – Ellipse Jig (Pre 2020 Model), 7/8" – Eureka Interface