Universal Router Plate


This kit allows virtually any router to be fitted with the Micro Fence System (even routers that have no holes for an Edge Guide can be accommodated). The plate’s counter-bored center hole accepts  1  3/8″ guide bushings  (the standard Porter-Cable size).

The Universal Plate is used for our Interface Package, our Ellipse Jig and our Off-Fence Mortising Kit. The first two of these also require a Riser Block Assembly to position our Edge Guide or Circle Jig at the appropriate height when installed on the plate, whereas the Off-Fence Mortising Kit does not. For convenience’s sake the option to add a Riser Block to your router plate purchase is provided in the “Riser Block Size Options” section below.

Any router can be mounted on our plate. You have the option of installing it yourself (by drilling the hole pattern for your router’s base) or having the plate pre-drilled specifically for your router at our factory.

This kit requires the Model A Mounting Bar (not included).

  • We maintain an inventory of most major router makes and models (60-some). We are able to provide the Pre-Drill service only for those routers we have on hand. If we cannot do so for your router, we provide an instruction sheet for doing it yourself using your router’s sub-base as a template.
  • The plate is automatically pre-drilled and tapped with three pairs of holes for attaching our aluminum Off-Fence Mortising fence.

Additional information

Weight 1 lbs
Dimensions 7.5 × 8 × .375 in