Center Bar & Outboard Levelers Use w/Edge-Guide


The Center Bar & Outboard Levelers can be used with the Micro Fence Edge Guide to cut small circles (our standard Circle Jig covers 6″ to 48″). A center bar spans the throat of the Edge Guide and provides a Center Pin that can be positioned as close as you wish to the bit (circles from 1/2″ to approx. 12″). Applications include guitar rosettes, plinth blocks, toy wheels and components, and hardware installations. This accessory is also the least expensive way to add circular capability to the task range of the Edge-Guide.


*Notes: Our original Plunge Base is drilled and tapped to accept this accessory. For a smaller footprint when routing small circles with our Micro Plunge Base, consider the Inboard Levelers.

Installing the Center Bar and Levelers on other brands of routers will require you to remove the sub-base, drill two holes, and replace it before use. You can view instructions for the Center Bar and Levelers here.

Here is an example of how the Center Bar and Outboard Levelers look when they are installed.



Additional information

Weight .18 lbs
Dimensions 5 × 4 × 1 in