Guide Shafts

$9.95$49.95

Micro Fence offers pairs of stainless steel Guide Shafts in five different sizes. While the Guide Shafts are interchangeable among our tools, here are some details about how they are used:

The 3″ Guide Shafts are standard in our Micro Stop.

The 5″ Guide Shafts increase the reach of the Micro Stop anvil to 3 1/2″.

The 7″ Guide Shafts extend the reach of the Micro Stop anvil to 5 1/2″. These are also included in our Edge-Guide Package.

Our 12″  Guide Shafts extend the reach of the Micro Stop anvil to 10 1/2″. These are also included in our Edge-Guide Package.

Our 24″ Guide Shafts* are interchangeable with the standard 12″ and extend the reach of the Circle or Ellipse Jigs. When cutting larger radii, we recommend using our Stabilizer Bars and/or Stabilizer Bar Levelers at intervals of about 24″-30″. These maximize rigidity, prevent any sag in the stainless steel rods, and offer insurance against any loosening of the brass thumbscrews due to vibration.

Our 36″ Guide Shafts* are interchangeable with the standard 12″ and extend the reach of our Circle or Ellipse Jigs. When cutting larger radii, we recommend using our Stabilizer Bars and/or Stabilizer Bar Levelers at intervals of about 24″-30″. These maximize rigidity, prevent any sag  and offer insurance against any loosening of the brass thumbscrews due to router vibration.

*Please Note: Additional shipping prices may apply.

Clear

Additional information

Weight N/A
Dimensions N/A