Riser Blocks and Trimmer Posts

$10.00 - $30.00

The Riser Block Assembly is for use with our Clamp Interface Packages and our Ellipse Packages to properly align the vertical height of our jigs. Three different Riser Blocks, all 1/2″ wide by 3″ long, are available in three different height dimensions (1/4″, 1/2″ and 7/8″).

The 1/2″ block is used with our Ellipse Jigs and with all of our Clamp Interface Packages with the exception of the Eurekazone (this requires the 7/8″ block). The 1/4″ block was  needed to level our Circle Jig on the older Ellipse Jigs (pre-2020). You can select the appropriate dimension block from the drop-down box below. The Riser Blocks are packaged with a pair of the Trimmer Posts and appropriate screws, which make it the Riser Block Assembly.

We’ve provided an option to exclude either the Riser Block or the Trimmer Posts for those who do not need one or the other.

Riser Block *

Trimmer Posts *

Product total

Options total

Grand total

Additional information

Weight .125 lbs
Dimensions 5 × 2.5 × .5 in
Riser Block Size:

None, 1/2" – Clamp Interface + New Version Ellipse Jig (Aluminum Axes Plate), 1/4" – Ellipse Jig (Pre 2020 Model), 7/8" – Eureka Interface

Trimmer Posts

No, Yes