Interface – If you already own the Circle Jig

$99.95$159.95

REQUIREMENTS: The Micro Fence Circle Jig

Our UHMW Interface Slide combines with our Universal Router Plate Kit to become the Micro Fence® Interface. We can fit any of the straight-edge extrusions listed in the drop-down box below.

This set-up allows micrometer-adjusted cuts (dadoes, rabbets, flutes, etc.) using the clamp as a straight-edge. Adjustments to the dimension of your cut can be made without moving the clamp.

The UHMW Interface Slide mounts on the underside of the Circle Jig trammel bar (the one with the Micro Fence® micrometer) and fits the extrusion of the clamps. Any router can be mounted on the Universal Router Plate. You can drill the plate yourself by using the factory sub-base from your router as a template (instructions and a centering hub are included with each Interface), or we can pre-drill the plate for you for most model routers (as long as we have a copy of the tool among the 50 plus routers we have in our shop). Just add our Pre-Drill Service to your cart and choose your model router.

All Interface packages require a Model “A” Mounting Bar, so if you don’t already have one, please select the option that includes the Model A Bar (not sure if you already have the Model A Bar? Call us at 1-800-480-6427 and we will check your customer record).

Clear

Stop Collar Set

To memorize cut positions or pre-set where a second cut will occur. Especially useful for flute spacing or dadoes to fit off-sized sheet goods.

DynaGlide

Dry lube with no silicone or teflon to eliminate drag and keep our tools operating at peak performance.

12″ Guide Shafts

For a little longer reach.

SKU: 60+45/KIT Category:

Description

What comes in the box (w/ Model A Mounting Bar)
What comes in the box (w/o Mounting Bar)

Additional information

Weight 1.25 lbs
Dimensions 12 × 9 × 3 in