Rosette & Sound Hole Cutting Assembly

$85.00 - $599.00

Designed to address a luthier’s need for precision when making and/or installing rosettes and cutting sound holes, our rosette cutting kit can meet the highest of standards with ease. It provides the measuring accuracy to produce snap-fit inlay channels in radii from 1-5 inch (2-10 inch diameter), making it suitable for steel-string, classical guitar and ukelele work, as well as any other small circle cutting requirements your imagination can dream up.

The full set, used in conjunction with calipers, provides tack sharp .001” adjustments in both the vertical and horizontal planes. Every set-up is a matter of one test cut, a measurement, and one fine-tuning adjustment.

The full set-up includes a two-piece plastic sub-base, the micrometer-adjusted trammel bar, linkage to connect the sub-bases, a flush-fitting, stainless steel flanged center-pin sleeve and our Micro Plunge Base.

Team this set-up with our 1/8” shank down-spiral bits for the best possible results.

Accessories can include our six-LED Light Ring Kit, Battery Pack, Stop Collars

If you already own our Circle Jig and Micro Plunge Base, all you’ll need is the #92/Rosette/Set.

Available for either Proxxon IB/E, most Dremel models, or Foredom 44T rotary tools.

Complete Package

For those who do not own our Micro Plunge Base or Circle Jig. This package includes all three components of the Rosette Cutter Assembly: Micro Plunge Base, Short Circle Jig, and Acrylic Plates.

MPB + Rosette Set

This package is intended for customers who already own our Circle Jig. If you do not already have a pair of our 5" Guide Shafts, we highly recommend adding them below for optimal use with this application.

Note: our Model A Mounting Bar is required for use with our Trimmer Posts. If you do not already own one, please add it below. (The Model A Mounting Bar is included with our Interface Packages, Ellipse Jig, Sub-Base Assemblies, or if you ordered our Edge Guide for the Porter Cable 100, 150, 350, 630, 670, 690, 691, 693, 890, 891, 893, or 9290)

Circle Jig/Short + Rosette Set

This package is intended for those who already own our Micro Plunge Base, or those that wish to accomodate other high speed rotary tools. We provide two holes for mounting the StewMac fixed or plunge bases (However: this forgoes the depth-of-cut measurement capability of our MPB, and the ability to use our Light Rings).

Rosette Set

This package is inteded for those who already own both our Micro Plunge Base and Circle Jig. If you do not already have a pair of our 5" Guide Shafts, we highly recommend adding them below for optimal use with this application.

Note: our Model A Mounting Bar is required for use with our Trimmer Posts. If you do not already own one, please add it below. (The Model A Mounting Bar is included with our Interface Packages, Ellipse Jig, Sub-Base Assemblies, or if you ordered our Edge Guide for the Porter Cable 100, 150, 350, 630, 670, 690, 691, 693, 890, 891, 893, or 9290)

Product total

Options total

Grand total

Description

Additional information

Weight 3 lbs
Dimensions 10 × 10 × 10 in